Welcome to our websites!

Sanitary Flush Diaphragm Pressure Transmitters

  • WP435B Sanitary Flush Pressure Transmitter

    WP435B Sanitary Flush Pressure Transmitter

    The WP435B type Sanitary Flush pressure transmitter is assembled with imported high-precision and high-stability anti-corrosion chips. The chip and the stainless steel shell are welded together by a laser welding process. There is no pressure cavity. This pressure transmitter is suitable for pressure measurement and control in a variety of easily blocked, hygienic, easy to clean or aseptic environments. This product has a high working frequency and is suitable for dynamic measurement.

  • WP435K Ceramic capacitor non-cavity Flush diaphragm Pressure Transmitter

    WP435K Ceramic capacitor non-cavity Flush diaphragm Pressure Transmitter

    WP435K non-cavity Flush diaphragm pressure transmitter adopts advanced imported sensor component (Ceramic capacitor) with high precision, high stability and anti-corrosion. This series pressure transmitter can work stably for a long time under high temperature work environment (maximum 250℃). Laser welding technology is used between sensor and stainless steel house, without pressure cavity. They are suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, they also are fit for dynamic measurement. 

  • WP435F High Temperature 350℃ Flush Diaphragm Pressure Transmitter

    WP435F High Temperature 350℃ Flush Diaphragm Pressure Transmitter

    WP435F High Temperature 350℃ Flush Diaphragm Pressure Transmitter adopt advanced imported sensor component with high precision, high stability and anti-corrosion. This mode can work stably for a long time under high temperature work environment (maximum 350℃). Laser welding technology is used between sensor and stainless steel house, without pressure cavity. It is suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, it is also fit for dynamic measurement. 

  • WP435E High Temperature 250℃ Flush Diaphragm Pressure Transmitter

    WP435E High Temperature 250℃ Flush Diaphragm Pressure Transmitter

    WP435E High Temperature 250℃ Flush Diaphragm Pressure Transmitter adopt advanced imported sensor component with high precision, high stability and anti-corrosion. This mode can work stably for a long time under high temperature work environment (maximum 250). Laser welding technology is used between sensor and stainless steel house, without pressure cavity. It is suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, it is also fit for dynamic measurement. 

  • WP435D Sanitary Type Column Non-cavity Pressure Transmitter

    WP435D Sanitary Type Column Non-cavity Pressure Transmitter

    WP435D Sanitary Type Column Non-cavity Pressure Transmitter is specially designed for food application. Its pressure-sensitive diaphragm is at the front end of the thread, the sensor is at the back of the heat sink, and high-stability edible silicone oil is used as the pressure transmission medium in the middle. This ensures the effect of low temperature during food fermentation and high temperature during tank cleaning on the transmitter. Operating temperature of this model is up to 150℃. Transmitters for gauge pressure measurement use vent cable and put molecular sieve on both ends of the cable that avoiding the performance of transmitter affected by condensation and dewfall. This series are suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, they also are fit for dynamic measurement. 

  • WP435C Sanitary Type Flush Diaphragm Non-cavity Pressure Transmitter

    WP435C Sanitary Type Flush Diaphragm Non-cavity Pressure Transmitter

    WP435C Sanitary Type Flush Diaphragm Non-cavity Pressure Transmitter is specially designed for food application. Its pressure-sensitive diaphragm is at the front end of the thread, the sensor is at the back of the heat sink, and high-stability edible silicone oil is used as the pressure transmission medium in the middle. This ensures the effect of low temperature during food fermentation and high temperature during tank cleaning on the transmitter. Operating temperature of this model is up to 150℃. Transmitters for gauge pressure measurement use vent cable and put molecular sieve on both ends of the cable that avoiding the performance of transmitter affected by condensation and dewfall. This series are suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, they also are fit for dynamic measurement. 

  • WP435A Food Application Sanitary Type  Pressure Transmitter

    WP435A Food Application Sanitary Type Pressure Transmitter

    WP435A Series flush diaphragm pressure transmitters adopt advanced imported sensor component with high precision, high stability and anti-corrosion. This series pressure transmitter can work stably for a long time under high temperature work environment. Laser welding technology is used between sensor and stainless steel house, without pressure cavity. They are suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, they also are fit for dynamic measurement. 

     

  • WP435S All Stainless Steel Construction Flush Pressure Transmitter

    WP435S All Stainless Steel Construction Flush Pressure Transmitter

    WP435S flush pressure transmitter is designed all stainless steel construction and adopts advanced imported sensor component with high precision, high stability and anti-corrosion. This series pressure transmitter can work stably for a long time under high temperature work environment (maximum 350℃). Laser welding technology is used between sensor and stainless steel house, without pressure cavity. They are suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, they also are fit for dynamic measurement.