WP401A Industrial pressure transmitters adopt advanced imported sensor component, which is combined with the solid state integrated technological and isolate diaphragm technology.
The pressure transmitter is designed to work well under various conditions.
The temperature compensation resistance makes on the ceramic base, which is the excellent technology of the pressure transmitters.
Various output signal 4-20mA (2-wire), strong anti-jamming, it is suitable for long distance transmission.
WP401 series Industrial pressure transmitters adopt advanced imported sensor component, which is combined with the solid state integrated technological and isolate diaphragm technology.
The pressure transmitter is designed to work well under various conditions.
The temperature compensation resistance makes on the ceramic base, which is the excellent technology of the pressure transmitters.
Various output signal 4-20mA (2-wire), strong anti-jamming, it is suitable for long distance transmission.
WP401B pressure transmitters adopt advanced imported advanced sensor component, which is combined with the solid state integrated technological and isolate diaphragm technology.
The pressure transmitter is designed to work well under various conditions.
The temperature compensation resistance makes on the ceramic base, which is the excellent technology of the pressure transmitters. It has all standard output signals 4-20mA, 0-5V, 1-5V, 0-10V, 4-20mA + HART, RS485. This pressure transmitter has strong anti-jamming and suits for long distance transmission application.
The WP435B type Sanitary Flush pressure transmitter is assembled with imported high-precision and high-stability anti-corrosion chips. The chip and the stainless steel shell are welded together by a laser welding process. There is no pressure cavity. This pressure transmitter is suitable for pressure measurement and control in a variety of easily blocked, hygienic, easy to clean or aseptic environments. This product has a high working frequency and is suitable for dynamic measurement.
The major components of WP3051 are the sensor module and the electronics housing. Piezoresistive /Capacitive sensor technology is utilized in the wangyuan WP3051 measurements. The sensor module contains the oil filled sensor system (isolating diaphragms, oil fill system, and sensor) and the sensor electronics. The sensor electronics are installed within the sensor module and include a temperature sensor (RTD), a memory module, and the capacitance to digital signal converter (C/D converter). The electrical signals from the sensor module are transmitted to the output electronics in the electronics housing. The electronics housing contains the output electronics board, the local zero and span buttons, and the terminal block.
WP311A Hydrostatic Submersible Level Transmitter (also called hydrostatic level measurement, Submersible pressure transmitters) use advanced imported anti-corrosion diaphragm sensitive components, the sensor chip was put inside of a stainless steel (or PTFE) enclosure. The function of the top steel cap is protecting transmitter, and the cap can make the measured liquids contact the diaphragm smoothly.
A special vented tube cable was used, and it makes the back pressure chamber of diaphragm connect well with atmosphere, the measurement liquid level is not affected by the change of outside atmospheric pressure. This Submersible level transmitter has accurate measurement, good long term stability, and has excellent sealing and anti-corrosion performance, it meets marine standard, and it can be directly put into water, oil and other liquids for a long-term use.
Special internal construct technology completely solves the problem of condensation and dewfall
Using special electronic design technology to basically solve the problem of lightning strike
The temperature transmitter is integrated with the conversion circuit, which not only saves expensive compensation wires, but also reduces signal transmission loss, and improves the anti-interference ability during long-distance signal transmission.
Linearization correction function, thermocouple temperature transmitter has cold end temperature compensation.
WPLD series electromagnetic flow meters are designed to measure the volumetric flow rate of almost any electrically conductive liquids, as well as sludges, pastes and slurries in duct. A prerequisite is that the medium must have a certain minimum conductivity. The temperature, pressure, viscosity and density have little influence on the result. Our various magnetic flow transmitters offer reliable operation as well as easy installation and maintenance.
WPLD series magnetic flow meter has wide range of flow solution with high quality, accurate and reliable products. Our Flow Technologies can provide a solution for virtually all flow applications. The transmitter is robust, cost-effective and suitable for all-round applications and has a measuring accuracy of ± 0.5% of the flow rate.
WP311B Immersion Type 4-20mA Water Level Transmitter (also called hydrostatic pressure transmitter, Submersible pressure transmitters) use advanced imported anti-corrosion diaphragm sensitive components, the sensor chip was put inside of a stainless steel (or PTFE) enclosure. The function of the top steel cap is protecting transmitter, and the cap can make the measured liquids contact the diaphragm smoothly.
A special vented tube cable was used, and it makes the back pressure chamber of diaphragm connect well with atmosphere, the measurement liquid level is not affected by the change of outside atmospheric pressure. This Submersible level transmitter has accurate measurement, good long term stability, and has excellent sealing and anti-corrosion performance, it meets marine standard, and it can be directly put into water, oil and other liquids for a long-term use.
Special internal construct technology completely solves the problem of condensation and dewfall
Using special electronic design technology to basically solve the problem of lightning strike
WP320 Magnetic Level Gauge is one of the on-site level measuring instruments for the industrial process control. It is widely applied in the monitoring and process control of liquid level and interface for many industries, such as Petroleum, Chemical, Electric power, Paper-making, Metallurgy, Water treatment, Light industry and etc. The float adopts design of 360 ° magnet ring and the float is hermetically sealed, hard and anti-compression. The indicator that uses hermetical sealed glass tube technology clearly displays the level, which eliminates the common problems of glass gauge, such as vapour condensation and liquid leakage and etc.
WP435K non-cavity Flush diaphragm pressure transmitter adopts advanced imported sensor component (Ceramic capacitor) with high precision, high stability and anti-corrosion. This series pressure transmitter can work stably for a long time under high temperature work environment (maximum 250℃). Laser welding technology is used between sensor and stainless steel house, without pressure cavity. They are suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, they also are fit for dynamic measurement.
WP3051LT Flange mounted pressure level transmitter adopts differential capacitive pressure sensor, can do an accurate pressure measurement for a variety of containers. Diaphragm seals are used to prevent process medium from contacting differential pressure transmitter directly, therefore it is especially suitable for level, pressure and density measurement of special media (high temperature, macro viscosity, easy crystallized, easy precipitated, strong corrosion) in open or sealed containers.
WP3051LT differential pressure transmitter included plane type and insert type. The mounting flange has 3” and 4” according to ANSI standard, specifications for 150 1b and 300 1b. Normally we adopt GB9116-88 standard. If the user has any special requirement please contact us.