Welcome to our websites!

Pressure Transmitters

  • WP401 Series Economical type Industrial Pressure transmitter

    WP401 Series Economical type Industrial Pressure transmitter

    WP401 series Industrial pressure transmitters adopt advanced imported sensor component, which is combined with the solid state integrated technological and isolate diaphragm technology.

    The pressure transmitter is designed to work well under various conditions.

    The temperature compensation resistance makes on the ceramic base, which is the excellent technology of the pressure transmitters.

    Various output signal 4-20mA (2-wire), strong anti-jamming, it is suitable for long distance transmission.

  • WP401A Standard Type Industrial Pressure transmitter

    WP401A Standard Type Industrial Pressure transmitter

    WP401A Industrial pressure transmitters adopt advanced imported sensor component, which is combined with the solid state integrated technological and isolate diaphragm technology.

    The pressure transmitter is designed to work well under various conditions.

    The temperature compensation resistance makes on the ceramic base, which is the excellent technology of the pressure transmitters.

    Various output signal 4-20mA (2-wire), strong anti-jamming, it is suitable for long distance transmission.

  • WP401B Colum Economical Type Pressure Transmitter

    WP401B Colum Economical Type Pressure Transmitter

    WP401B pressure transmitters adopt advanced imported advanced sensor component, which is combined with the solid state integrated technological and isolate diaphragm technology.

    The pressure transmitter is designed to work well under various conditions.

    The temperature compensation resistance makes on the ceramic base, which is the excellent technology of the pressure transmitters. It has all standard output signals 4-20mA, 0-5V, 1-5V, 0-10V, 4-20mA + HART, RS485. This pressure transmitter has strong anti-jamming and suits for long distance transmission application.

  • WP435B Sanitary Flush Pressure Transmitter

    WP435B Sanitary Flush Pressure Transmitter

    The WP435B type Sanitary Flush pressure transmitter is assembled with imported high-precision and high-stability anti-corrosion chips. The chip and the stainless steel shell are welded together by a laser welding process. There is no pressure cavity. This pressure transmitter is suitable for pressure measurement and control in a variety of easily blocked, hygienic, easy to clean or aseptic environments. This product has a high working frequency and is suitable for dynamic measurement.

  • WP3051DP Differential Pressure Transmitters

    WP3051DP Differential Pressure Transmitters

    The major components of WP3051 are the sensor module and the electronics housing. Piezoresistive /Capacitive sensor technology is utilized in the wangyuan WP3051 measurements. The sensor module contains the oil filled sensor system (isolating diaphragms, oil fill system, and sensor) and the sensor electronics. The sensor electronics are installed within the sensor module and include a temperature sensor (RTD), a memory module, and the capacitance to digital signal converter (C/D converter). The electrical signals from the sensor module are transmitted to the output electronics in the electronics housing. The electronics housing contains the output electronics board, the local zero and span buttons, and the terminal block.  

  • WP435K Ceramic capacitor non-cavity Flush diaphragm Pressure Transmitter

    WP435K Ceramic capacitor non-cavity Flush diaphragm Pressure Transmitter

    WP435K non-cavity Flush diaphragm pressure transmitter adopts advanced imported sensor component (Ceramic capacitor) with high precision, high stability and anti-corrosion. This series pressure transmitter can work stably for a long time under high temperature work environment (maximum 250℃). Laser welding technology is used between sensor and stainless steel house, without pressure cavity. They are suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, they also are fit for dynamic measurement. 

  • WP3051LT Flange mounted Pressure Level Transmitter

    WP3051LT Flange mounted Pressure Level Transmitter

    WP3051LT Flange mounted pressure level transmitter adopts differential capacitive pressure sensor, can do an accurate pressure measurement for a variety of containers. Diaphragm seals are used to prevent process medium from contacting differential pressure transmitter directly, therefore it is especially suitable for level, pressure and density measurement of special media (high temperature, macro viscosity, easy crystallized, easy precipitated, strong corrosion) in open or sealed containers.

    WP3051LT differential pressure transmitter included plane type and insert type. The mounting flange has 3” and 4” according to ANSI standard, specifications for 150 1b and 300 1b. Normally we adopt GB9116-88 standard. If the user has any special requirement please contact us.

  • WP3051T In-line Pressure Transmitters

    WP3051T In-line Pressure Transmitters

    The Wangyuan WP3051T In-line pressure transmitters design is offered for Gage Pressure (GP) and Absolute Pressure (AP) measurements. Piezoresistive sensor technology is utilized in the wangyuan WP3051T measurements.

    The major components of WP3051 are the sensor module and the electronics housing. The sensor module contains the oil filled sensor system (isolating diaphragms, oil fill system, and sensor) and the sensor electronics. The sensor electronics are installed within the sensor module and include a temperature sensor (RTD), a memory module, and the capacitance to digital signal converter (C/D converter). The electrical signals from the sensor module are transmitted to the output electronics in the electronics housing. The electronics housing contains the output electronics board, the local zero and span buttons, and the terminal block. This type pressure transmitter can replace the original Rosemount corresponding ones. 

  • WP3351DP Differential Pressure Transmitters with Remote device & Flange mounted

    WP3351DP Differential Pressure Transmitters with Remote device & Flange mounted

    WP3351 DP Remote Differential Pressure Transmitters with flange mounted can avoid measured medium direct contact with transmitter diaphragm. It is especially suitable for application environment like this:

    1. Measured medium will corrode wetted parts and sensitive components of differential pressure transmitter

    2. Need to isolate high temperature medium with differential pressure transmitter

    3. Suspended solids in the measured medium or high viscosity medium easy to plug transmitter connector

    and pressure chamber.

    4. Pressure pipe lead out measured medium, easy solidification or crystallization

    5. Replace medium, probe needs washing and mix medium is not allowed

    6. Keep sanitary, prevent pollution

  • WP435F High Temperature 350℃ Flush Diaphragm Pressure Transmitter

    WP435F High Temperature 350℃ Flush Diaphragm Pressure Transmitter

    WP435F High Temperature 350℃ Flush Diaphragm Pressure Transmitter adopt advanced imported sensor component with high precision, high stability and anti-corrosion. This mode can work stably for a long time under high temperature work environment (maximum 350℃). Laser welding technology is used between sensor and stainless steel house, without pressure cavity. It is suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, it is also fit for dynamic measurement. 

  • WP435E High Temperature 250℃ Flush Diaphragm Pressure Transmitter

    WP435E High Temperature 250℃ Flush Diaphragm Pressure Transmitter

    WP435E High Temperature 250℃ Flush Diaphragm Pressure Transmitter adopt advanced imported sensor component with high precision, high stability and anti-corrosion. This mode can work stably for a long time under high temperature work environment (maximum 250). Laser welding technology is used between sensor and stainless steel house, without pressure cavity. It is suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, it is also fit for dynamic measurement. 

  • WP435D Sanitary Type Column Non-cavity Pressure Transmitter

    WP435D Sanitary Type Column Non-cavity Pressure Transmitter

    WP435D Sanitary Type Column Non-cavity Pressure Transmitter is specially designed for food application. Its pressure-sensitive diaphragm is at the front end of the thread, the sensor is at the back of the heat sink, and high-stability edible silicone oil is used as the pressure transmission medium in the middle. This ensures the effect of low temperature during food fermentation and high temperature during tank cleaning on the transmitter. Operating temperature of this model is up to 150℃. Transmitters for gauge pressure measurement use vent cable and put molecular sieve on both ends of the cable that avoiding the performance of transmitter affected by condensation and dewfall. This series are suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, they also are fit for dynamic measurement. 

123 Next > >> Page 1 / 3