WP3051 WP3351 Differential Pressure Transmitters
-
WP3051DP Differential Pressure Transmitters
The major components of WP3051 are the sensor module and the electronics housing. Piezoresistive /Capacitive sensor technology is utilized in the wangyuan WP3051 measurements. The sensor module contains the oil filled sensor system (isolating diaphragms, oil fill system, and sensor) and the sensor electronics. The sensor electronics are installed within the sensor module and include a temperature sensor (RTD), a memory module, and the capacitance to digital signal converter (C/D converter). The electrical signals from the sensor module are transmitted to the output electronics in the electronics housing. The electronics housing contains the output electronics board, the local zero and span buttons, and the terminal block.
-
WP3051LT Flange mounted Pressure Level Transmitter
WP3051LT Flange mounted pressure level transmitter adopts differential capacitive pressure sensor, can do an accurate pressure measurement for a variety of containers. Diaphragm seals are used to prevent process medium from contacting differential pressure transmitter directly, therefore it is especially suitable for level, pressure and density measurement of special media (high temperature, macro viscosity, easy crystallized, easy precipitated, strong corrosion) in open or sealed containers.
WP3051LT differential pressure transmitter included plane type and insert type. The mounting flange has 3” and 4” according to ANSI standard, specifications for 150 1b and 300 1b. Normally we adopt GB9116-88 standard. If the user has any special requirement please contact us.
-
WP3051T In-line Pressure Transmitters
The Wangyuan WP3051T In-line pressure transmitters design is offered for Gage Pressure (GP) and Absolute Pressure (AP) measurements. Piezoresistive sensor technology is utilized in the wangyuan WP3051T measurements.
The major components of WP3051 are the sensor module and the electronics housing. The sensor module contains the oil filled sensor system (isolating diaphragms, oil fill system, and sensor) and the sensor electronics. The sensor electronics are installed within the sensor module and include a temperature sensor (RTD), a memory module, and the capacitance to digital signal converter (C/D converter). The electrical signals from the sensor module are transmitted to the output electronics in the electronics housing. The electronics housing contains the output electronics board, the local zero and span buttons, and the terminal block. This type pressure transmitter can replace the original Rosemount corresponding ones.
-
WP3351DP Differential Pressure Transmitters with Remote device & Flange mounted
WP3351 DP Remote Differential Pressure Transmitters with flange mounted can avoid measured medium direct contact with transmitter diaphragm. It is especially suitable for application environment like this:
1. Measured medium will corrode wetted parts and sensitive components of differential pressure transmitter
2. Need to isolate high temperature medium with differential pressure transmitter
3. Suspended solids in the measured medium or high viscosity medium easy to plug transmitter connector
and pressure chamber.
4. Pressure pipe lead out measured medium, easy solidification or crystallization
5. Replace medium, probe needs washing and mix medium is not allowed
6. Keep sanitary, prevent pollution
