This series Flange mounted Pressure Level Transmitter can be used in Oil & Gas, Pulp & Paper, Pharmaceutical, Power, light industry, Water & Wastewater, Petroleum, Chemicals Mechanical and Metallurgy, Environmental protection fields and etc.
WP3051LT Flange mounted pressure level transmitter adopts differential capacitive pressure sensor, can do an accurate pressure measurement for a variety of containers. Diaphragm seals are used to prevent process medium from contacting differen...
WPH-3 series beam Compression load cells are used in multiples in floor scales, belt weighers, weighing systems, pallet scales, check scales, conveyor scales.
Most beam Compression load cells are fully approved acc. to OIML, NTEP, FM and ATEX as standard. Thus they can be globally used in legal weighing systems. They are mostly made from stainless steel to cope with harsh industrial environment.
Name
Beam Compression load cell
Capacity ranges
0-5,10,20,30,50,100,200,300kg;
0.5,0.8,1,1.5...
WPL-1 Tension load cell is ideal for floor scales, weigh bars, hanging scales,wall-mounted hoppers.
The direct mounting schema allows for low-profile platforms. The large possible platform size of up to 1000x1000mm in conjunction with metrology approval guarantees performance even when large eccentric load is applied. Nickel plated steel and IP67 protection allow usage in harsh industrial environment. IL is available in various capacities.
Name
Tension load cell
Capacity ranges
0-20N~20...
WPH-1 compression Load cell suits for measuring small range and a variety of load force too
WPH-1 compression Load cell adopts combined type S beam, there is overload protection device inside. With the advantage of natural linear and stability, this load cell suit for measuring small range and a variety of load force too. It’s a excellent conversion instrument of electronic belt scales.
Name
Compression load cell
Capacity ranges
0-1,2,5,8,10,20,30,50,100,150,200,300kg
Output
4-20mA ,0-...
WPH-3 series beam Compression load cells are used in multiples in floor scales, belt weighers, weighing systems, pallet scales, check scales, conveyor scales.
Most beam Compression load cells are fully approved acc. to OIML, NTEP, FM and ATEX as standard. Thus they can be globally used in legal weighing systems. They are mostly made from stainless steel to cope with harsh industrial environment.
Name
Beam Compression load cell
Capacity ranges
0-5,10,20,30,50,100,200,300kg;
0.5,0.8,1,1.5...
WPH-1 compression Load cell suits for measuring small range and a variety of load force too
WPH-1 compression Load cell adopts combined type S beam, there is overload protection device inside. With the advantage of natural linear and stability, this load cell suit for measuring small range and a variety of load force too. It’s a excellent conversion instrument of electronic belt scales.
Name
Compression load cell
Capacity ranges
0-1,2,5,8,10,20,30,50,100,150,200,300kg
Output
4-20mA ,0-...
WP421B 350℃ medium and high temperature pressure transmitter is widely used to measure and control for various industries, including hydraulic and level measurement, Boiler, Gas tank pressure monitoring, Industrial test and control, Petroleum, Chemical industry, offshore, electric power, ocean, coal mine and Oil & Gas.
The WP421B medium and high temperature pressure transmitter is assembled with imported high temperature resistant sensitive components, and the sensor probe can work stably...
This pressure gauge can be used to measure and control pressure for various industries and processing, including Designed for use in chemical and petrochemical, Power plant, and pharmaceutical, All stainless steel material, Suitable for corrosive environments and Gases or liquids.
Name
WP Series Pressure gauges
Case size
100mm,150mm,other size available
Accuracy
1.6%, 2.5%
Case material
Stainless steel, Aluminium
Range
- 0.1~100MPa
Bourdon material
304ss, 316ss
Movement material...
WPH-1 compression Load cell suits for measuring small range and a variety of load force too
WPH-1 compression Load cell adopts combined type S beam, there is overload protection device inside. With the advantage of natural linear and stability, this load cell suit for measuring small range and a variety of load force too. It’s a excellent conversion instrument of electronic belt scales.
Name
Compression load cell
Capacity ranges
0-1,2,5,8,10,20,30,50,100,150,200,300kg
Output
4-20mA ,0-...
WP402A high precision pressure transmitter is widely used to exactitude measure and control for various industries.
★ Military project
★ Aerospace, Oil & Gas
★ Petroleum, Chemical industry
★ Electric power, Water supply
★ Ocean, coal mine and etc.
WP402A pressure transmitter selects imported, high-precision sensitive components with anti-corrosion film. The component combines solid-state integration technology with isolation diaphragm technology, and the product design allows it to work ...
WPL-2 tension Load cell can be used to measure pull weight and force, and pressure load too.
This Tension S type load cell has advantages of adopting shear stress measurement, simple structure, easy to install, High stability & reliability. It is applied as primary instruments of hopper scales, crane scales and etc.
Name
Tension S type load cell
Capacity ranges
0-2~200kN (0-0.2~20t)
Output
4-20mA ,0-10mA , 0-5V , Optional
Maximum Capacity
150% FS
Nonlinearity
±0.05%FS
Re...
WPH-3 series beam Compression load cells are used in multiples in floor scales, belt weighers, weighing systems, pallet scales, check scales, conveyor scales.
Most beam Compression load cells are fully approved acc. to OIML, NTEP, FM and ATEX as standard. Thus they can be globally used in legal weighing systems. They are mostly made from stainless steel to cope with harsh industrial environment.
Name
Beam Compression load cell
Capacity ranges
0-5,10,20,30,50,100,200,300kg;
0.5,0.8,1,1.5...