Pressure Transmitters
-
WP435E High Temperature 250℃ Flush Diaphragm Pressure Transmitter
WP435E High Temperature 250℃ Flush Diaphragm Pressure Transmitter adopt advanced imported sensor component with high precision, high stability and anti-corrosion. This mode can work stably for a long time under high temperature work environment (maximum 250℃). Laser welding technology is used between sensor and stainless steel house, without pressure cavity. It is suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, it is also fit for dynamic measurement.
-
WP435D Sanitary Type Column Non-cavity Pressure Transmitter
WP435D Sanitary Type Column Non-cavity Pressure Transmitter is specially designed for food application. Its pressure-sensitive diaphragm is at the front end of the thread, the sensor is at the back of the heat sink, and high-stability edible silicone oil is used as the pressure transmission medium in the middle. This ensures the effect of low temperature during food fermentation and high temperature during tank cleaning on the transmitter. Operating temperature of this model is up to 150℃. Transmitters for gauge pressure measurement use vent cable and put molecular sieve on both ends of the cable that avoiding the performance of transmitter affected by condensation and dewfall. This series are suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, they also are fit for dynamic measurement.
-
WP435C Sanitary Type Flush Diaphragm Non-cavity Pressure Transmitter
WP435C Sanitary Type Flush Diaphragm Non-cavity Pressure Transmitter is specially designed for food application. Its pressure-sensitive diaphragm is at the front end of the thread, the sensor is at the back of the heat sink, and high-stability edible silicone oil is used as the pressure transmission medium in the middle. This ensures the effect of low temperature during food fermentation and high temperature during tank cleaning on the transmitter. Operating temperature of this model is up to 150℃. Transmitters for gauge pressure measurement use vent cable and put molecular sieve on both ends of the cable that avoiding the performance of transmitter affected by condensation and dewfall. This series are suitable to measure and control the pressure in all kinds of easy to clog, sanitary, sterile, easy to clean environment. With the feature of high working frequency, they also are fit for dynamic measurement.
-
WP201A Standard type Differential Pressure Transmitter
The WP201A Standard type Differential Pressure Transmitter adopts imported high-precision and high-stability sensor chips, adopts unique stress isolation technology, and undergoes precise temperature compensation and high-stability amplification processing to convert the differential pressure signal of the measured medium into 4-20mA standards signal output. High-quality sensors, sophisticated packaging technology and perfect assembly process ensure the excellent quality and best performance of the product.
WP201A can be equipped with an integrated indicator, the differential pressure value can be displayed on site, and the zero point and range can be continuously adjusted. This product is widely used in furnace pressure, smoke and dust control, fans, air conditioners and other places for pressure and flow detection and control. This type of transmitter can also be used for measuring gauge pressure (negative pressure) by using single terminal.
-
WP401BS Pressure Transmitter
Piezoresistive Sensor Technology is utilized in the measurement of WangYuan WP401BS Pressure Transmitter . The temperature compensation resistance makes on the ceramic base, which is the excellent technology of the pressure transmitters. Widely output signals are available. This series is used to measure the pressure of engine oil, brake system, fuel, diesel engine high-pressure common rail test system in the automotive industry. It can also be used to measure the pressure for liquid, gas and steam.
-
WP201M Digital High Accuracy Differential Pressure Gauge
WP201M Digital Differential Pressure Gauge uses all-electronic structure, powered by AA batteries and is convenient for on-site installation. The fore-end adopts imported high-performance sensor chips, output signal is processed by amplifier and microprocessor. The actual differential pressure value is presented by 5 bits high field visibility LCD display after computation.
-
WP401M Battery Powered High Accuracy Digital Pressure Gauge
This WP401M High Accuracy Digital Pressure Gauge use all-electronic structure, powered by battery and convenient to install on site. The fore-end adopts the high precision pressure sensor, output signal is treated by amplifier and microprocessor. The actual pressure value will be presented by 5 bits LCD display after computation.
-
WP402A Military Project high precision Pressure transmitter
WP402A pressure transmitter selects imported, high-precision sensitive components with anti-corrosion film. The component combines solid-state integration technology with isolation diaphragm technology, and the product design allows it to work in harsh environments and still maintain excellent working performance. The resistance of this product for temperature compensation is made on the mixed ceramic substrate, and the sensitive components provide a small temperature error of 0.25% FS (maximum) within the compensation temperature range (-20~85℃). This pressure transmitter has strong anti-jamming and suits for long distance transmission application.
-
WP501 Pressure transmitter & pressure Switch with local display LED
WP501 Pressure Switch is the intelligent display pressure controller combining with pressure measure, display and control together. With the integral electric relay, the WP501 can do much more than a typical process transmitter! In addition to monitoring the process, the application may call for providing an alarm or shutting down a pump or compressor, even actuating a valve.
WP501 Pressure Switch is reliable, sensitive switches. Its compact design and combination of set-point sensitivity and narrow or optional adjustable deadband, offers cost-saving solutions for a variety of applications. The product is used flexibly and easily calibrated, can be used for pressure measure, display and control for power station, tap water, petroleum, chemical-industry, engineer and liquid pressure, etc.
-
WP401B Pressure Switch with pressure transducer function
WP401B pressure switch adopt advanced imported advanced sensor component, which is combined with the solid state integrated technological and isolate diaphragm technology. The pressure transmitter is designed to work well under various conditions. The temperature compensation resistance makes on the ceramic base, which is the excellent technology of the pressure transmitters. It has standard output signals 4-20mA and switch function (PNP, NPN). This pressure transducer has strong anti-jamming and suits for long distance transmission application.
-
WP201D China manufacturer Economical Mini Liquid Differential Pressure Transmitter
The WP201D differential pressure transmitter adopts imported high-precision and high-stability sensor chips, adopts unique stress isolation technology, and undergoes precise temperature compensation and high-stability amplification processing to convert the differential pressure signal of the measured medium into 4-20mADC standards Signal output. High-quality sensors, sophisticated packaging technology and perfect assembly process ensure the excellent quality and best performance of the product.
WP201D can be equipped with an integrated indicator, the differential pressure value can be displayed on site, and the zero point and range can be continuously adjusted. This product is widely used in furnace pressure, smoke and dust control, fans, air conditioners and other places for pressure and flow detection and control. This type of transmitter can also be used for measuring gauge pressure (negative pressure) via connecting one port.
-
WP201C China Factory Wind Gas Liquid Differential Pressure Transmitter
The WP201C differential pressure transmitter adopts imported high-precision and high-stability sensor chips, adopts unique stress isolation technology, and undergoes precise temperature compensation and high-stability amplification processing to convert the differential pressure signal of the measured medium into 4-20mADC standards Signal output. High-quality sensors, sophisticated packaging technology and perfect assembly process ensure the excellent quality and best performance of the product.
WP201C can be equipped with an integrated indicator, the differential pressure value can be displayed on site, and the zero point and range can be continuously adjusted. This product is widely used in furnace pressure, smoke and dust control, fans, air conditioners and other places for pressure and flow detection and control. This type of transmitter can also be used for measuring gauge pressure (negative pressure) via connecting one port.
