OEM Customized Non Contact Level Transmitter – WP311B Immersion Type 4-20mA Water Level Transmitter – Wangyuan

WP311B Immersion type 4-20mA water level transmitter can be used to measure & control liquid level in：

★  Level measuring

★ Building automation

★ Ocean and marine

★ Constant pressure water supply 

★ Metallurgy, environment protection 

★ Medical treatment and etc.

WP311B Immersion type 4-20mA water level transmitter(also called hydrostatic pressure transmitter, Submersible pressure transmitters) use advanced imported anti-corrosion diaphragm sensitive components, the sensor chip was put inside of a stainless steel (or PTFE) enclosure. The function of the top steel cap is protecting transmitter, and the cap can make the measured liquids contact the diaphragm smoothly.
A special vented tube cable was used, and it makes the back pressure chamber of diaphragm connect well with atmosphere, the measurement liquid level is not affected by the change of outside atmospheric pressure. This Submersible level transmitter has accurate measurement, good long term stability, and has excellent sealing and anti-corrosion performance, it meets marine standard, and it can be directly put into water, oil and other liquids for a long-term use.

Special internal construct technology completely solves the problem of condensation and dewfall
Using special electronic design technology to basically solve the problem of lightning strike

Display type:

1) 4 bits LCD local display

2) 4 bits LED local display

3) 4 bits/5 bits LCD smart local display( output signal is 4-20ma+ hart protocol)

Two-piece Level transmitter with junction box
Only pressure probe of this level transmitter will be thrown in liquid, circuit board is inside of junction box from another end, easy to adjust by customer. Installation method: Type B junction box is M36*2 thread installation or DN50 PN0.6(GB9119-88) Standard flange installation ( or you can choose “L shape mounting bracket”); Type C junction box is 3-Φ18 installation hole( evenly distributed on roundΦ134).
Probe’s material of two-piece level transmitter is SUS304 or SUS316L, cable sheathing is rubber plastic.
Special requirement, Teflon probe, SS or Teflon cable sheathing is available.