This series Radar Level Meter can be used to measure & control liquid level in: Metallurgy, Paper-making, Water treatment, Biological pharmacy, Oil & Gas, Light industry, Medical treatment and etc.
As a non-contact method of level measurement, the WP260 Radar Level Meter sends microwave signals downside to the medium from the top and receive the signals reflected back by the medium surface then medium level can be determined. Under this approach, the microwave signal of radar is hardl...
This series assembly thermocouple can be used for the temperature measuring and control in the erumpent processing of chemical fiber, rubber plastic, food , boiler and other industries.
WR series Assembly thermocouple adopts thermocouple or resistance as the temperature measuring element, it is normally matched with display, recording and regulating instrument, to measure the surface temperature (from -40 to 1800 Centigrade) of liquid, steam, gas and solid during various production process.
...
WP421A medium and high temperature pressure transmitter is widely used to measure and control for various industries, including hydraulic and level measurement, Boiler, Gas tank pressure monitoring, Industrial test and control, Petroleum, Chemical industry, offshore, electric power, ocean, coal mine and Oil & Gas.
The WP421A medium and high temperature pressure transmitter is assembled with imported high temperature resistant sensitive components, and the sensor probe can work stably for ...
This WPLU Series Liquid Steam Vortex Flow Meters can be widely used in various pipeline water supply and drainage, industrial circulation, sewage treatment, oil and chemical reagent and all kinds of gas medium flow measurement
WPLU series Vortex flow meters are suitable for a wide range of media. It measures both conducting and non-conducting liquids as well as all industrial gases. It also measures saturated steam and superheated steam, compressed air and nitrogen, liquefied gas and flue gas...
WP401B LED Digital Pressure Switch can be used to measure & control gauge or absolute pressure in a variety of different industrial applications:
✦ Air Duct
✦ SCADA System
✦ Oxygen Generator
✦ Oilfield Water Injection
✦ Gas Gate Station
✦ Irrigation Pipeline
✦ Crude Oil Dehydration
✦ Wind Turbine Generator
WP401B Tilt LED Pressure Switch adopts 5-wire cable lead connection transmitting both 4~20mA and relay outputs. The function of High & Low alarm point facilitate monitor and contr...
WP311B Immersion type Water Level Sensor can be used to measure & control liquid level in:
✦ Reservoir Surveillance
✦ Sewage Treatment Factory
✦ Petrochemical Storage
✦ Pharmaceutical and Medical
✦ Building Automation
✦ LNG Fueling Station
✦ Environmental Protection
✦ Offshore and Maritime
Advanced imported hydrostatic sensing component and superb diaphragm sealing technology are applied on WP311 series level transducers. The sensor chip is placed inside a stainless steel (or ot...
This series pressure transmitter pressure switch can be used to measure & control liquid pressure for various industries, including Chemical industry, Oil & Gas, power station & Tap water, paper & pulp industry, printing & dyeing industry, Food & Beverage plants, Industrial test and control, mechanical engineering, building automation.
WP501 pressure switch is the intelligent display pressure controller combining with pressure measure, display and control together. Wit...
WP435D Sanitary type Pressure Transmitter can be used to measure & control the pressure of high process temperature liquid and fluid in following sanitation-demanding industries:
✦ Slurry Treatment
✦ Pharmaceutical Production
✦ Pulp & Paper
✦ Phosphate Plant
✦ Palm Oil Plant
✦ Water Treatment
✦ Liquor Factory
✦ Cement Production
Ideal for sanitary, sterlie, easy clean and anti-clog use
Flush Diaphragm, optional tri-clamp or flange mounting
Wide choices of corrosion resistant diaphra...
This industrial pressure transmitter can be used to measure and control pressure for various industries, including petroleum and chemical industry, Electric power, water supply, Oil & Gas, environmental protection and other automatic control industries.
WP401C Industrial pressure transmitters adopt advanced imported sensor component, which is combined with the solid state integrated technological and isolate diaphragm technology.
The pressure transmitter is designed to work well under var...
WSS Bimetallic Thermometer is suitable for many different industrial applications:
✦ Petrochemical
✦ Machine Building
✦ Pharmaceutical
✦ Heating Equipment
✦ Refrigeration System
✦ Air Conditioning
✦ Asphalt Tank
✦ Solvent Extraction
WSS Bimetallic Thermometer is industrial-proven practical mechanical field temperature measuring device. The sealed robust IP65 enclosure made of stainless steel ensures applications with harsh ambient condition and vibration. The dial can be emplaced radially,...
WP201M High Accuracy LCD Differential Pressure Gauge can be used to measure and control differential pressure in various occasions, including chemical, petroleum, oil & gas, power plant, water treatment, leakage monitoring, environmental protection and other industrial automation applications.
5 bits LCD intuitive display (-19999~99999), easy to operate
Higher precision than ordinary mechanical gauges
AA battery-operated and sturdily built
Small signal elimination, more stable zero displa...
WP421B 350℃ medium and high temperature pressure transmitter is widely used to measure and control for various industries, including hydraulic and level measurement, Boiler, Gas tank pressure monitoring, Industrial test and control, Petroleum, Chemical industry, offshore, electric power, ocean, coal mine and Oil & Gas.
The WP421B medium and high temperature pressure transmitter is assembled with imported high temperature resistant sensitive components, and the sensor probe can work stably...