HideShow
-
WP421A Intrinsically Safe 250℃ Negative Pressure Transmitter
WP421A Intrinsically Safe 250℃ Negative Pressure Transmitter is assembled with imported heat resistant sensing components to withstand high temperature process medium and heat sink construct to protect upper circuit board. The sensor probe is able to operate stably for long periods of time at 250℃ high temperature condition. The internal lead holes are filled with high-efficiency thermal insulation material aluminium silicate, which effectively prevents heat conduction and ensures the amplification and conversion circuit part operate at allowable temperature. Structural design can be upgrade to explosion proof to further enhance its resilience in severe operating condition. Negative pressure down to -1bar is acceptable as the measuring span.
-
WZ series Assembly RTD Pt100 Temperature Sensor
WZ series Resistance Thermometer is made of Platinum wire, which is used for measuring various liquids, gases and other fluids temperature. With advantage of high accuracy, excellent resolution ratio, safety, reliability, easily use and etc. this temperature transducer is also can be directly used to measure a variety of liquids, steam-gas and gas medium temperature during production process.
-
WP3051LT Flange Mounted Level Transmitter
WP3051LT Flange Mounted Level Transmitter adopts differential capacitive pressure sensor making accurate pressure measurement for water and other liquids in a variety of containers. Diaphragm seals are used to prevent process medium from contacting differential pressure transmitter directly, therefore it is especially suitable for level, pressure and density measurement of special media (high temperature, macro viscosity, easy crystallized, easy precipitated, strong corrosion) in open or sealed containers.
WP3051LT includes plain type and insert type. The mounting flange has 3” and 4” according to ANSI standard, specifications for 150 1b and 300 1b. Normally we adopt GB9116-88 standard. If the user has any special requirement please contact us.
-
WP311A RS485 Output 4-wire Integral Immersion Liquid Level Transmitter
WP311A Integral Immersion Liquid Level Transmitter measures liquid level by metering hydraulic pressure using the sensor probe put into vessel bottom. The probe enclosure protects the sensor chip, and the cap makes measured medium contact the diaphragm smoothly.
-
WP3051DP Threaded Capacitive Differential Pressure Transmitter
WP3051DP Thread Connected Differential Pressure Transmitter is one of WangYuan‘s star products which adopts best quality capacitance DP-sensing components. The product can be used for continuous pressure difference monitoring of liquid, gas, fluid in all aspects of industrial process control as well as level measurement of liquid inside sealed tanks. Besides default 1/4″NPT(F) thread, the process connection is customizable including remote capillary flange mounting.
-
WP3051DP Hastelloy C-276 Diaphragm Differential Pressure Transmitter
WP3051DP is a high performance differential pressure transmitter which is perfectly ideal for pressure difference monitoring of liquid, gas and fluid as well as level measurement of closed storage tanks. Featuring industry-proven robust capsule design and highly precise & stable pressure-sensing electronics, the transmitter can output 4~20mA direct current signal with up to 0.1%FS accuracy.
-
WZ series Cable Lead Dual Pt100 Elements Duplex RTD Temperature Sensor
WZ Duplex RTD Temperature Sensor configures double Pt100 sensing elements in one probe with 6-wire cable lead for temperature measurement of liquid, gas, fluid in all kinds of industrial process control. Dual-element of thermal resistance can provide simultaneous readings and mutual monitoring. It also ensures redundancy for maintenance and backup.
-
WP311A Immersion type Lightning Protection Probe Outdoor Water Level Transmitter
WP311A Immersion type Lightning Protection Probe Outdoor Water Level Transmitter consists of specially designed lightning protection probe component. The Level Transmitter is rather suitable for level measurement of stagnant water as well as other liquids in harsh outdoor open area.
-
WP435B Cylindrical Hygienic Pressure Transmitter with Flat Process Connection
The WP435B Cylindrical Hygienic Pressure Transmitter adopts a straightforward all stainless steel welded cylinder case assembled with imported high-precision and corrosion protection sensor chip. Design of the wetted-part and process connection are flat and tightly sealed without any pressure cavity. WP435B is suitable for pressure measurement and control of media that highly vicious, contaminated, containing solid or easy to clog. It has no hygienic dead space and is convenient for rinse.
-
WP311B Teflon Cable Ex-proof Hydrostatic Submersible Level Sensor
WangYuan WP311B Teflon Cable Ex-proof Hydrostatic Submersible Level Sensor applied imported sensitive components installed in a solid stainless steel probe which is connected to a NEPSI certificated explosion protection terminal box by a special anti-corrosion polytetrafluoroethylene (Teflon) vented cable to ensure the diaphragm back pressure chamber is effectively connected to the atmosphere. WP311B‘s proven, extraordinarily sturdy construction ensures precise measurement, long-term stability, excellent sealing and corrosion protection.
-
WP401B Compact Design Cylinder RS-485 Pressure Sensor
WP401B Compact Cylinder Pressure Sensor is a miniature-sized pressure measuring instrument outputting amplified standard analog signal. It is practical and flexible for installation on complicated process equipment. Output signal can be chosen from multiple specification including 4-wire Mobdus-RTU RS-485 industrial protocol which is a universal and ease-of-use master-slave system which can operate over all kinds of communication media.
-
WP401B Compact Design Cylinder RS-485 Air Pressure Sensor
WP401B Compact Design Cylinder RS-485 Air Pressure Sensor adopts advanced imported advanced sensor component, which is combined with the solid state integrated technological and isolate diaphragm technology. Its compact, lightweight design is ease-of-use and ideal for panel mount solutions.
The compact type pressure sensor has all standard output signals of 4-20mA, 0-5V, 1-5V, 0-10V, 4-20mA + HART, RS485. Intelligent LCD and sloping LED with 2-relay is configurable. The series of products ensures outstanding performance at a rather favourable price.