WP435D Sanitary type Pressure Transmitter can be used to measure & control the pressure of high process temperature liquid and fluid in following sanitation-demanding industries:
✦ Slurry Treatment
✦ Pharmaceutical Production
✦ Pulp & Paper
✦ Phosphate Plant
✦ Palm Oil Plant
✦ Water Treatment
✦ Liquor Factory
✦ Cement Production
Ideal for sanitary, sterlie, easy clean and anti-clog use
Flush Diaphragm, optional tri-clamp or flange mounting
Wide choices of corrosion resistant diaphra...
WP201D Differential Pressure Transmitter can be used to measure and control pressure differential of liquid and gas in various industries:
✦ Pump Station
✦ Waterworks
✦ Sewage Treatment
✦ Automotive Electronics
✦ Heating System
✦ Gas Station
✦ Cleaning Room
✦ Vacuum Dryer
WP201D can be equipped with tiny LCD/LED indicator to display real time readings on site. Zero point and range span can be adjusted externally. Max. permissible static pressure reaches 10MPa. It is best to install the prod...
This series pressure transmitter pressure switch can be used to measure & control liquid pressure for various industries, including Chemical industry, Oil & Gas, power station & Tap water, paper & pulp industry, printing & dyeing industry, Food & Beverage plants, Industrial test and control, mechanical engineering, building automation.
WP501 pressure switch is the intelligent display pressure controller combining with pressure measure, display and control together. Wit...
WP311B Immersion type Water Level Sensor can be used to measure & control liquid level in:
✦ Reservoir Surveillance
✦ Sewage Treatment Factory
✦ Petrochemical Storage
✦ Pharmaceutical and Medical
✦ Building Automation
✦ LNG Fueling Station
✦ Environmental Protection
✦ Offshore and Maritime
Advanced imported hydrostatic sensing component and superb diaphragm sealing technology are applied on WP311 series level transducers. The sensor chip is placed inside a stainless steel (or ot...
This throttle orifice flow meter can be widely used in Mining, Petroleum refining, Chemical industry, Medical technology, Power generation, Food & beverage plant, Paper & Pulp industry, Energy & combined heat, Purified water and waste water, Oil & Gas products and transportation, Dyeing and Coal and other industries.
WPLG series throttle Orifice Plate flow meter is a mostly common flow meter, which can be used for measuring the flow of liquids/ gases and vapour during industri...
WP435 series Non-cavity Pressure Transmitter can be used to measure & control the pressure of liquids and fluid in following fields:
Food & Beverage Industry
Pharmaceutical, Paper & Pulp Industry
Sewage Water, Sweage Sludge Treatment
Sugar Plant, other Sanitary Plant
Best choice for Sanitary, Sterlie, Easy cleaning and Anti-clogging apllications.
Flush or Corrugated Diaphragm, Clamp mounting
Multiple Diaphragm Material choices: 304, 316L, Tantalum, Hastelloy C, PTFE, Cerami...
This series Float type liquid level transmitter can be used to measure & control liquid pressure in Level measuring, Building automation, Ocean and ship, Constant pressure water supply, Chemical industry, Metallurgy, environment protection, Medical treatment and etc.
WP316 float type liquid level transmitter is composed of magnetic float ball, floater stabilizing tube, reed tube switch, explosion proof wire-connecting box and fixing components. As the float ball raised or lowered by liqui...
This series armored thermocouple can be used for the temperature measuring and control in the erumpent processing of chemical fiber, rubber plastic, food , boiler and other industries.
WR series armored thermocouple adopts thermocouple or resistance as the temperature measuring element, it is normally matched with display, recording and regulating instrument, to measure the surface temperature (from -40 to 800 Centigrade) of liquid, steam, gas and solid during various production process.
M...
This Submersible Liquid Hydrostatic Pressure Level Transmitter can be used to measure & control liquid level for various industries, including constant pressure water supply, wastewater treatment plants, Building automation, Ocean and marine, metallurgy, environment protection, Medical treatment and etc.
WP311C Submersible Level Transmitter (also called Level Sensor, Level Transducer) use advanced imported anti-corrosion diaphragm sensitive components, the sensor chip was put inside of a ...
This Electromagnetic Flow meter can be widely used in Food plant, Sugar, Vintage, Metallurgy, Paper & Pulp, Petroleum Chemical industry, & waste water treatment and environmental protection, dyeing and Coal and other industries.
WPLD series electromagnetic flow meters are designed to measure the volumetric flow rate of almost any electrically conductive liquids, as well as sludges, pastes and slurries in duct. A prerequisite is that the medium must have a certain minimum conductivity....
WP311A Hydrostatic Pressure Throw-in Level Transmitter is used for storage level measurement & control in a variety of industrial and civil applications:
✦ Chemical Storage Vessel
✦ Ship Ballast Tank
✦ Collecting Well
✦ Groundwater Well
✦ Reservoir and Dam
✦ Wastewater Treatment System
✦ Rainwater Outlet
WP311A Hydrostatic Pressure Throw-in Level Transmitter is designed to be simple and integrally constructed without any terminal box above level. Hydraulic pressure-sensing probe is protec...
WP201D Differential Pressure Transmitter can be used to measure and control pressure differential of liquid and gas in various industries:
✦ Pump Station
✦ Waterworks
✦ Sewage Treatment
✦ Automotive Electronics
✦ Heating System
✦ Gas Station
✦ Cleaning Room
✦ Vacuum Dryer
WP201D can be equipped with tiny LCD/LED indicator to display real time readings on site. Zero point and range span can be adjusted externally. Max. permissible static pressure reaches 10MPa. It is best to install the prod...