WPL-2 tension Load cell can be used to measure pull weight and force, and pressure load too.
This Tension S type load cell has advantages of adopting shear stress measurement, simple structure, easy to install, High stability & reliability. It is applied as primary instruments of hopper scales, crane scales and etc.
Name
Tension S type load cell
Capacity ranges
0-2~200kN (0-0.2~20t)
Output
4-20mA ,0-10mA , 0-5V , Optional
Maximum Capacity
150% FS
Nonlinearity
±0.05%FS
Re...
This series radar level meter can be used to measure & control liquid level in: Metallurgy, paper-making, water treatment, biological pharmacy, commodity and drinks, light industry and etc. Medical treatment and etc.
WP260 This series of radar level meter adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 60 meters. Antenna is optimized further processing, the new fast microprocessors have higher speed and efficiency can be done signal analysis, the ins...
This Metal-Tube Float Flow meter / Rotameter can be widely used in national defense, chemical industry, petroleum, metallurgy, electricity, environmental protection, medicine and light industry.
WPZ Series Metal-Tube Float Flowmeter has been awarded first prize of national major technique & equipment innovation, and excellence prize of the Ministry of Chemical Industry. It was entitled to take the task of the H27 Metal-Tube Float Flowmeter in abroad market due to its simple structure, rel...
WPH-1 compression Load cell suits for measuring small range and a variety of load force too
WPH-1 compression Load cell adopts combined type S beam, there is overload protection device inside. With the advantage of natural linear and stability, this load cell suit for measuring small range and a variety of load force too. It’s a excellent conversion instrument of electronic belt scales.
Name
Compression load cell
Capacity ranges
0-1,2,5,8,10,20,30,50,100,150,200,300kg
Output
4-20mA ,0-...
This WPLU Series Liquid Steam Vortex Flow Meters can be widely used in various pipeline water supply and drainage, industrial circulation, sewage treatment, oil and chemical reagent and all kinds of gas medium flow measurement
WPLU series Vortex flow meters are suitable for a wide range of media. It measures both conducting and non-conducting liquids as well as all industrial gases. It also measures saturated steam and superheated steam, compressed air and nitrogen, liquefied gas and flue gas...
This series armored thermal resistance temperature transducer can be used for the temperature measuring and control in the erumpent processing of chemical fiber, rubber plastic, food, boiler and other industries.
WZPK Series Armored thermal resistance (RTD) has advantages of high precision, anti- high temperature, fast thermal response time, long lifetime and etc. this armored thermal resistance can be used to measure the temperature of liquids, steams, gases under -200 to 500 centigrade, as ...
This V-cone flowmeter can be widely used in Mining, Petroleum refining, Chemical industry, Medical technology, Power generation, Food & beverage plant, Paper & Pulp industry, Energy & combined heat, Purified water and waste water, Oil & Gas products and transportation, Dyeing and Coal and other industries.
WPLV series V-cone flowmeter is an innovative flowmeter with high-precise flow measure and specially design to various kinds of difficult occasion carry out high-precisely s...
This series pressure transmitter can be widely used in
Petroleum industry
Water flow measurement
Steam measurement
Oil & Gas products and transportation
The Wangyuan WP3051T In-line pressure transmitters design is offered for Gage Pressure (GP) and Absolute Pressure (AP) measurements. Piezoresistive sensor technology is utilized in the wangyuan WP3051T measurements.
The major components of WP3051 are the sensor module and the electronics housing. The sensor module contains the oil filled ...
WPH-3 series beam Compression load cells are used in multiples in floor scales, belt weighers, weighing systems, pallet scales, check scales, conveyor scales.
Most beam Compression load cells are fully approved acc. to OIML, NTEP, FM and ATEX as standard. Thus they can be globally used in legal weighing systems. They are mostly made from stainless steel to cope with harsh industrial environment.
Name
Beam Compression load cell
Capacity ranges
0-5,10,20,30,50,100,200,300kg;
0.5,0.8,1,1.5...
WPH-1 compression Load cell suits for measuring small range and a variety of load force too
WPH-1 compression Load cell adopts combined type S beam, there is overload protection device inside. With the advantage of natural linear and stability, this load cell suit for measuring small range and a variety of load force too. It’s a excellent conversion instrument of electronic belt scales.
Name
Compression load cell
Capacity ranges
0-1,2,5,8,10,20,30,50,100,150,200,300kg
Output
4-20mA ,0-...
WB series temperature transmitter adopts thermocouple or resistance as the temperature measuring element, it is normally matched with display, recording and regulating instrument to measure the temperature of liquid, steam, gas and solid during various production process. It can be widely used in automation temperature control system, such as metallurgy, machinery, petroleum, electricity, chemical industry, light industry, textile, building materials and so on.
The temperature transmitter is ...
WPL-2 tension Load cell can be used to measure pull weight and force, and pressure load too.
This Tension S type load cell has advantages of adopting shear stress measurement, simple structure, easy to install, High stability & reliability. It is applied as primary instruments of hopper scales, crane scales and etc.
Name
Tension S type load cell
Capacity ranges
0-2~200kN (0-0.2~20t)
Output
4-20mA ,0-10mA , 0-5V , Optional
Maximum Capacity
150% FS
Nonlinearity
±0.05%FS
Re...