This series Flange mounted Pressure Level Transmitter can be used in Oil & Gas, Pulp & Paper, Pharmaceutical, Power, light industry, Water & Wastewater, Petroleum, Chemicals Mechanical and Metallurgy, Environmental protection fields and etc.
WP3051LT Flange mounted pressure level transmitter adopts differential capacitive pressure sensor, can do an accurate pressure measurement for a variety of containers. Diaphragm seals are used to prevent process medium from contacting differen...
WPH-1 compression Load cell suits for measuring small range and a variety of load force too
WPH-1 compression Load cell adopts combined type S beam, there is overload protection device inside. With the advantage of natural linear and stability, this load cell suit for measuring small range and a variety of load force too. It’s a excellent conversion instrument of electronic belt scales.
Name
Compression load cell
Capacity ranges
0-1,2,5,8,10,20,30,50,100,150,200,300kg
Output
4-20mA ,0-...
WPL-1 Tension load cell is ideal for floor scales, weigh bars, hanging scales,wall-mounted hoppers.
The direct mounting schema allows for low-profile platforms. The large possible platform size of up to 1000x1000mm in conjunction with metrology approval guarantees performance even when large eccentric load is applied. Nickel plated steel and IP67 protection allow usage in harsh industrial environment. IL is available in various capacities.
Name
Tension load cell
Capacity ranges
0-20N~20...
This series float type level switch controller can be used to measure & control liquid pressure in Level measuring, Building automation, Ocean and ship, Constant pressure water supply, Chemical industry, Metallurgy, environment protection, Medical treatment and etc.
WP319 FLOAT TYPE LEVEL SWITCH Controller is composed of magnetic float ball, floater stabilizing tube, reed tube switch, explosion proof wire-connecting box and fixing components. magnetic float ball goes up and down along tu...
This throttle orifice flow meter can be widely used in Mining, Petroleum refining, Chemical industry, Medical technology, Power generation, Food & beverage plant, Paper & Pulp industry, Energy & combined heat, Purified water and waste water, Oil & Gas products and transportation, Dyeing and Coal and other industries.
WPLG series throttle Orifice Plate flow meter is a mostly common flow meter, which can be used for measuring the flow of liquids/ gases and vapour during industri...
WP421B 350℃ medium and high temperature pressure transmitter is widely used to measure and control for various industries, including hydraulic and level measurement, Boiler, Gas tank pressure monitoring, Industrial test and control, Petroleum, Chemical industry, offshore, electric power, ocean, coal mine and Oil & Gas.
The WP421B medium and high temperature pressure transmitter is assembled with imported high temperature resistant sensitive components, and the sensor probe can work stably...
WPL-2 tension Load cell can be used to measure pull weight and force, and pressure load too.
This Tension S type load cell has advantages of adopting shear stress measurement, simple structure, easy to install, High stability & reliability. It is applied as primary instruments of hopper scales, crane scales and etc.
Name
Tension S type load cell
Capacity ranges
0-2~200kN (0-0.2~20t)
Output
4-20mA ,0-10mA , 0-5V , Optional
Maximum Capacity
150% FS
Nonlinearity
±0.05%FS
Re...
This WPLU Series Liquid Steam Vortex Flow Meters can be widely used in various pipeline water supply and drainage, industrial circulation, sewage treatment, oil and chemical reagent and all kinds of gas medium flow measurement
WPLU series Vortex flow meters are suitable for a wide range of media. It measures both conducting and non-conducting liquids as well as all industrial gases. It also measures saturated steam and superheated steam, compressed air and nitrogen, liquefied gas and flue gas...
WPH-3 series beam Compression load cells are used in multiples in floor scales, belt weighers, weighing systems, pallet scales, check scales, conveyor scales.
Most beam Compression load cells are fully approved acc. to OIML, NTEP, FM and ATEX as standard. Thus they can be globally used in legal weighing systems. They are mostly made from stainless steel to cope with harsh industrial environment.
Name
Beam Compression load cell
Capacity ranges
0-5,10,20,30,50,100,200,300kg;
0.5,0.8,1,1.5...
WPL-1 Tension load cell is ideal for floor scales, weigh bars, hanging scales,wall-mounted hoppers.
The direct mounting schema allows for low-profile platforms. The large possible platform size of up to 1000x1000mm in conjunction with metrology approval guarantees performance even when large eccentric load is applied. Nickel plated steel and IP67 protection allow usage in harsh industrial environment. IL is available in various capacities.
Name
Tension load cell
Capacity ranges
0-20N~20...
This series ultrasonic level transmitters can be used to measure various liquids or solids level, also measure distance in: Water and Waste Water, Control Automation, Chemical Feed, Food and Beverage, Acids, Inks, Paints, Slurries, Waste sump, Day tank, Oil tank Process vessel and etc.
WP380 series ultrasonic level meter is an intelligent non-contact level measuring instrument, which can be used in bulk chemical, oil, and waste storage tanks, and it’s ideally suited for challenging corrosive,...
This series armored thermal resistance temperature transducer can be used for the temperature measuring and control in the erumpent processing of chemical fiber, rubber plastic, food, boiler and other industries.
WZPK Series Armored thermal resistance (RTD) has advantages of high precision, anti- high temperature, fast thermal response time, long lifetime and etc. this armored thermal resistance can be used to measure the temperature of liquids, steams, gases under -200 to 500 centigrade, as ...