WPH-2 compression load cell suits for platform scales, hopper scales, track scale and etc.
WPH-2 (Load Button) compression load cells are offered for compression only applications where space is limited. The matching surface must be flat. Counter bored mounting holes are provided for fastening down from the top. These sensors are manufactured from stainless steel and sealed for use in most industrial environments. With the advantages of high load capacity, high sensitivity, small size and goo...
This V-cone flowmeter can be widely used in Mining, Petroleum refining, Chemical industry, Medical technology, Power generation, Food & beverage plant, Paper & Pulp industry, Energy & combined heat, Purified water and waste water, Oil & Gas products and transportation, Dyeing and Coal and other industries.
WPLV series V-cone flowmeter is an innovative flowmeter with high-precise flow measure and specially design to various kinds of difficult occasion carry out high-precisely s...
WPH-2 compression load cell suits for platform scales, hopper scales, track scale and etc.
WPH-2 (Load Button) compression load cells are offered for compression only applications where space is limited. The matching surface must be flat. Counter bored mounting holes are provided for fastening down from the top. These sensors are manufactured from stainless steel and sealed for use in most industrial environments. With the advantages of high load capacity, high sensitivity, small size and goo...
WPL-1 Tension load cell is ideal for floor scales, weigh bars, hanging scales,wall-mounted hoppers.
The direct mounting schema allows for low-profile platforms. The large possible platform size of up to 1000x1000mm in conjunction with metrology approval guarantees performance even when large eccentric load is applied. Nickel plated steel and IP67 protection allow usage in harsh industrial environment. IL is available in various capacities.
Name
Tension load cell
Capacity ranges
0-20N~20...
WPH-2 compression load cell suits for platform scales, hopper scales, track scale and etc.
WPH-2 (Load Button) compression load cells are offered for compression only applications where space is limited. The matching surface must be flat. Counter bored mounting holes are provided for fastening down from the top. These sensors are manufactured from stainless steel and sealed for use in most industrial environments. With the advantages of high load capacity, high sensitivity, small size and goo...
WPL-2 tension Load cell can be used to measure pull weight and force, and pressure load too.
This Tension S type load cell has advantages of adopting shear stress measurement, simple structure, easy to install, High stability & reliability. It is applied as primary instruments of hopper scales, crane scales and etc.
Name
Tension S type load cell
Capacity ranges
0-2~200kN (0-0.2~20t)
Output
4-20mA ,0-10mA , 0-5V , Optional
Maximum Capacity
150% FS
Nonlinearity
±0.05%FS
Re...
This series ultrasonic level transmitters can be used to measure various liquids or solids level, also measure distance in: Water and Waste Water, Control Automation, Chemical Feed, Food and Beverage, Acids, Inks, Paints, Slurries, Waste sump, Day tank, Oil tank Process vessel and etc.
WP380 series ultrasonic level meter is an intelligent non-contact level measuring instrument, which can be used in bulk chemical, oil, and waste storage tanks, and it’s ideally suited for challenging corrosive,...
This Metal-Tube Float Flow meter / Rotameter can be widely used in national defense, chemical industry, petroleum, metallurgy, electricity, environmental protection, medicine and light industry.
WPZ Series Metal-Tube Float Flowmeter has been awarded first prize of national major technique & equipment innovation, and excellence prize of the Ministry of Chemical Industry. It was entitled to take the task of the H27 Metal-Tube Float Flowmeter in abroad market due to its simple structure, rel...
WPH-3 series beam Compression load cells are used in multiples in floor scales, belt weighers, weighing systems, pallet scales, check scales, conveyor scales.
Most beam Compression load cells are fully approved acc. to OIML, NTEP, FM and ATEX as standard. Thus they can be globally used in legal weighing systems. They are mostly made from stainless steel to cope with harsh industrial environment.
Name
Beam Compression load cell
Capacity ranges
0-5,10,20,30,50,100,200,300kg;
0.5,0.8,1,1.5...
WPL-2 tension Load cell can be used to measure pull weight and force, and pressure load too.
This Tension S type load cell has advantages of adopting shear stress measurement, simple structure, easy to install, High stability & reliability. It is applied as primary instruments of hopper scales, crane scales and etc.
Name
Tension S type load cell
Capacity ranges
0-2~200kN (0-0.2~20t)
Output
4-20mA ,0-10mA , 0-5V , Optional
Maximum Capacity
150% FS
Nonlinearity
±0.05%FS
Re...
This series radar level meter can be used to measure & control liquid level in: Metallurgy, paper-making, water treatment, biological pharmacy, commodity and drinks, light industry and etc. Medical treatment and etc.
WP260 This series of radar level meter adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 60 meters. Antenna is optimized further processing, the new fast microprocessors have higher speed and efficiency can be done signal analysis, the ins...
WPH-1 compression Load cell suits for measuring small range and a variety of load force too
WPH-1 compression Load cell adopts combined type S beam, there is overload protection device inside. With the advantage of natural linear and stability, this load cell suit for measuring small range and a variety of load force too. It’s a excellent conversion instrument of electronic belt scales.
Name
Compression load cell
Capacity ranges
0-1,2,5,8,10,20,30,50,100,150,200,300kg
Output
4-20mA ,0-...