This Electromagnetic Flow meter can be widely used in Food plant, Sugar, Vintage, Metallurgy, Paper & Pulp, Petroleum Chemical industry, & waste water treatment and environmental protection, dyeing and Coal and other industries.
WPLD series electromagnetic flow meters are designed to measure the volumetric flow rate of almost any electrically conductive liquids, as well as sludges, pastes and slurries in duct. A prerequisite is that the medium must have a certain minimum conductivity....
WPL-2 tension Load cell can be used to measure pull weight and force, and pressure load too.
This Tension S type load cell has advantages of adopting shear stress measurement, simple structure, easy to install, High stability & reliability. It is applied as primary instruments of hopper scales, crane scales and etc.
Name
Tension S type load cell
Capacity ranges
0-2~200kN (0-0.2~20t)
Output
4-20mA ,0-10mA , 0-5V , Optional
Maximum Capacity
150% FS
Nonlinearity
±0.05%FS
Re...
WP-LCD-C is a 32-channel touch color paperless recorder adopts a new large-scale integrated circuit, and is especially designed to be protective and undisturbed for input, output, power, and signal. Multiple input channels can be chose (configurable input selection: standard voltage, standard current, thermocouple, thermal resistance, millivolt, etc.). It supports 12-channel relay alarm output or 12 transmitting output, RS232 / 485 communication interface, Ethernet interface, micro-printer in...
WPH-1 compression Load cell suits for measuring small range and a variety of load force too
WPH-1 compression Load cell adopts combined type S beam, there is overload protection device inside. With the advantage of natural linear and stability, this load cell suit for measuring small range and a variety of load force too. It’s a excellent conversion instrument of electronic belt scales.
Name
Compression load cell
Capacity ranges
0-1,2,5,8,10,20,30,50,100,150,200,300kg
Output
4-20mA ,0-...
WP435A Flush diaphragm pressure transmitter is widely used to measure and control pressure for various industries, including food & beverage, sugar plants, Industrial test and control, mechanical engineering, building automation, pulp & paper, refinery.
WP435A Series flush diaphragm pressure transmitters adopt advanced imported sensor component with high precision, high stability and anti-corrosion. This series pressure transmitter can work stably for a long time under high temperatur...
WPL-1 Tension load cell is ideal for floor scales, weigh bars, hanging scales,wall-mounted hoppers.
The direct mounting schema allows for low-profile platforms. The large possible platform size of up to 1000x1000mm in conjunction with metrology approval guarantees performance even when large eccentric load is applied. Nickel plated steel and IP67 protection allow usage in harsh industrial environment. IL is available in various capacities.
Name
Tension load cell
Capacity ranges
0-20N~20...
This series pressure transmitter pressure switch can be used to measure & control liquid pressure for various industries, including Chemical industry, Oil & Gas, power station & Tap water, paper & pulp industry, printing & dyeing industry, Food & Beverage plants, Industrial test and control, mechanical engineering, building automation.
WP501 pressure switch is the intelligent display pressure controller combining with pressure measure, display and control together. Wit...
WP421B 350℃ medium and high temperature pressure transmitter is widely used to measure and control for various industries, including hydraulic and level measurement, Boiler, Gas tank pressure monitoring, Industrial test and control, Petroleum, Chemical industry, offshore, electric power, ocean, coal mine and Oil & Gas.
The WP421B medium and high temperature pressure transmitter is assembled with imported high temperature resistant sensitive components, and the sensor probe can work stably...
WPH-1 compression Load cell suits for measuring small range and a variety of load force too
WPH-1 compression Load cell adopts combined type S beam, there is overload protection device inside. With the advantage of natural linear and stability, this load cell suit for measuring small range and a variety of load force too. It’s a excellent conversion instrument of electronic belt scales.
Name
Compression load cell
Capacity ranges
0-1,2,5,8,10,20,30,50,100,150,200,300kg
Output
4-20mA ,0-...
WPL-2 tension Load cell can be used to measure pull weight and force, and pressure load too.
This Tension S type load cell has advantages of adopting shear stress measurement, simple structure, easy to install, High stability & reliability. It is applied as primary instruments of hopper scales, crane scales and etc.
Name
Tension S type load cell
Capacity ranges
0-2~200kN (0-0.2~20t)
Output
4-20mA ,0-10mA , 0-5V , Optional
Maximum Capacity
150% FS
Nonlinearity
±0.05%FS
Re...
WPL-1 Tension load cell is ideal for floor scales, weigh bars, hanging scales,wall-mounted hoppers.
The direct mounting schema allows for low-profile platforms. The large possible platform size of up to 1000x1000mm in conjunction with metrology approval guarantees performance even when large eccentric load is applied. Nickel plated steel and IP67 protection allow usage in harsh industrial environment. IL is available in various capacities.
Name
Tension load cell
Capacity ranges
0-20N~20...
This Electromagnetic Flow meter can be widely used in Food plant, Sugar, Vintage, Metallurgy, Paper & Pulp, Petroleum Chemical industry, & waste water treatment and environmental protection, dyeing and Coal and other industries.
WPLD series electromagnetic flow meters are designed to measure the volumetric flow rate of almost any electrically conductive liquids, as well as sludges, pastes and slurries in duct. A prerequisite is that the medium must have a certain minimum conductivity....