I-WP421B 350℃ Isidlulisi soxinzelelo sobushushu obuphakathi nophezulu
I-WP421B 350℃ i-transmitter yoxinzelelo oluphakathi noluphezulu isetyenziswa kakhulu ukulinganisa nokulawula amashishini ahlukeneyo, kuquka ukulinganisa nge-hydraulic kunye nenqanaba, iBoiler, ukujonga uxinzelelo lwetanki yegesi, uvavanyo kunye nolawulo lwemizi-mveliso, iPetroleum, imboni yeekhemikhali, ulwandle, amandla ombane, ulwandle, umgodi wamalahle kunye neoyile kunye negesi.
I-WP421B yoxinzelelo oluphakathi noluphezulu lobushushu ihlanganiswe nezinto ezingaphandle ezimelana nobushushu obuphezulu, kwaye i-sensor probe ingasebenza ngokuzinzileyo ixesha elide kubushushu obuphezulu obuyi-350℃. Inkqubo yokudibanisa ebandayo yelaser isetyenziswa phakathi kwe-core kunye ne-stainless steel shell ukuyinyibilikisa ngokupheleleyo ibe yi-body enye, ukuqinisekisa ukhuseleko lwe-transmitter phantsi kweemeko zobushushu obuphezulu. I-pressure core ye-sensor kunye ne-amplifier circuit zigqunywe ngee-gaskets ze-PTFE, kwaye kongezwa i-heat sink. Imingxunya yangaphakathi ye-lead izaliswe yi-aluminium silicate, ethintela ngokufanelekileyo ukuhanjiswa kobushushu kwaye iqinisekise ukuba i-amplification kunye ne-conversion circuit part work kubushushu obuvumelekileyo.
Iziphumo ezahlukeneyo zesignali
Iprotokholi ye-HART iyafumaneka
Nge-Heatsink / Iphini lokupholisa
Ukuchaneka okuphezulu 0.1%FS, 0.2%FS, 0.5%FS
Uyilo lolwakhiwo oluncinci noluqinileyo
Ubushushu bokusebenza: 150℃, 250℃, 350℃
I-LCD okanye i-LED ziyalungiselelwa
Uhlobo olungenakuqhuma: Ex iaIICT4, Ex dIICT6
| Igama | Umthumeli woxinzelelo oluphakathi noluphezulu lobushushu |
| Imodeli | I-WP421B |
| Uluhlu loxinzelelo | 0—0.2kPa～100kPa, 0－0.2kPa~100MPa. |
| Ukuchaneka | 0.1%FS; 0.2%FS; 0.5%FS |
| Uhlobo loxinzelelo | Uxinzelelo lwegeyiji (G), Uxinzelelo olupheleleyo (A),Uxinzelelo oluvaliweyo (S), Uxinzelelo olubi (N). |
| Uqhagamshelo lwenkqubo | G1/2”, M20X1.5, 1/2NPT, Yenzelwe wena |
| Uqhagamshelo lombane | IHirschmann/DIN, Iplagi yeenqwelo moya, Intambo yeGland, Intambo engangeni manzi |
| Isignali yesiphumo | 4-20mA (1-5V); 4-20mA + HART; RS485, RS485 + 4-20mA; 0-5V; 0-10V |
| Ukunikezwa Amandla | 24V(12-36V) DC, 12VDC(isignali yokuphuma: RS485 kuphela) |
| Ubushushu bokuhlawulwa | 0～150℃, 250℃, 350℃ |
| Ubushushu bokusebenza | Iprobe: 150℃, 250℃, 350℃ |
| Ibhodi yesekethe: -30～70℃ | |
| Ayinakuqhuma | Ikhuselekile ngaphakathi Ex iaIICT4; Ikhuselekile ingatshiyo Ex dIICT6 |
| Izinto eziphathekayo | Igobolondo: SUS304/SUS316L |
| Inxalenye emanzi: SUS304/ SUS316L, i-Titanium alloy, iHastelloy C-276 | |
| Phakathi | Umphunga, ioyile, igesi, umoya, amanzi, amanzi amdaka |
| Isalathisi (umboniso wengingqi) | I-LCD, i-LED (akukho siboniso xa isignali yokuphuma yi-4-20mA+ protocol ye-hart) |
| Uxinzelelo olugqithisileyo | 150%FS |
| Uzinzo | 0.5%FS/ ngonyaka |
| Ukuze ufumane ulwazi oluthe kratya malunga nesi sidluliseli soxinzelelo esiphakathi nesiphezulu, nceda uzive ukhululekile ukuqhagamshelana nathi. | |
Umboniso we-LCD (iibhithi ezi-3 1/2; iibhithi ezi-4; iibhithi ezi-5 ozikhethelayo)
Umboniso we-LED: iibhithi ezi-3 1/2; iibhithi ezi-4 ozikhethelayo)
